Double Component Loudspeaker Adhesive Epoxy AB Glue with 3-5 mins Initial Curing 24 Hours Fully Curing and 6 Months Shelf Life

This high-performance modified acrylic adhesive is specially designed for electronics, lighting, and related industries.

Ideal for bonding hard plastics and metals, particularly effective for speaker components including three-point voice coils, elastic waves, and drum paper, delivering excellent adhesion results.

• Low odor formulation
• Exceptional adhesion strength
• High temperature and vibration resistance
• Excellent electrical insulation properties
• Superior weather resistance
• Minimal shrinkage after curing
• Hard film quality with strong permeability

1. Thoroughly clean glue guns equipped with mixers before use. Mixed adhesive should not remain in the gun for more than 1 minute to prevent clogging.
2. After use, remove and soak spiral blades in acetone solution with the glue gun. Allow 2-4 hours for sound gauge adjustment at 25℃.
3. Below 15℃, viscosity and curing time change significantly. Warm adhesive in 35℃-45℃ water or oven for 30 minutes before use to maintain performance.
4. Testing should occur 24 hours after application at 25℃-35℃, or 48 hours when temperatures are below 15℃.

• Maintain proper workplace ventilation and keep away from children
• In case of skin or eye contact, rinse immediately with water or seek medical attention
• Never mix components before use and ensure proper cap replacement after use
• Store in cool, dry, well-ventilated areas away from heat sources
• Conduct preliminary tests for bulk applications to ensure proper bonding