logo
제품 소개에폭시 AB 접착제

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

제가 지금 온라인 채팅 해요

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

큰 이미지 :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

제품 상세 정보:
원래 장소: 중국 후난성
브랜드 이름: DEYI
결제 및 배송 조건:
최소 주문 수량: 10000

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

설명
색상: 분명한 점도: > 100000 cps/25 ℃
혼합 비: 1 : 1 근무 시간: 20분 진행됩니다
접촉 건조 시간: 30분 완전한 치료 시간: 24 시간
랩 전단 강도: ≥16 MPA 내열성: -60 ~ +100 to
유통기한: 12개월 주요재료: 에틸-사이아노아크릴레이트
산성 저항: 알칼리 저항:
오일 저항: 방수복:
불연성:
강조하다:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

연락처 세부 사항
Hunan Baxiongdi New Material Co., Ltd.

담당자: SU

전화 번호: 008615200906996

팩스: 86-731-86677379

회사에 직접 문의 보내기 (0 / 3000)